Validated BioAerosol Sampler
BioAerosol Air Sampler (BAS) is a high performance air sampler, based on the principle of Andersen impact method.
Flow rate 100L/min
Long battery life ≥10 hours (100L/min)
Data Storage 20,000 sets
Remote sampling 8 m
Product Features
4.3’’ rapid response capacitive touchscreen
All components and circuits interfaces are isolated from the external environment ro prevent oxidant intrusion
Long Battery Life 100L/min≥10hours (60m³）
Flow Accuracy ±2.5%（100L/min）
Compliance with FDA21 CFR Part 11
Remote Sampling
Powerful and stabilized pump to support Remote/Isolator sampling(up to 8m)
Operation Interface
Data
- Intuitive sampling records
- Search function for quick search of records - One-click for exporting and printing
Sampling
- Intelligent sampling mode enables continuous and cyclic sampling
-The sampling process is clear and distinct
LED lighting and beep prompt error
Setup
- Smart Settings mode
- User-friendly input method
Sampling Interface
Visual presentation of each parameter.
Sampling can be started with one click
or directly in the sampling interface for easy parameter setting
Remote sampling component allows sampling of critical areas or small spaces in laminar flow benches, biosafety cabinets or other areas where it is not convenient to place sampling equipment directly. Remote sampling mode supports up to 8 meters of sampling tubes.
Once sampling is complete, it can be removed and used for further bioparticle collection in cleanroom environments.
Sampling Interface
Visual presentation of each parameter.
Sampling can be started with one click
or directly in the sampling interface for easy parameter setting
Remote sampling component allows sampling of critical areas or small spaces in laminar flow benches, biosafety cabinets or other areas where it is not convenient to place sampling equipment directly. Remote sampling mode supports up to 8 meters of sampling tubes.
Once sampling is complete, it can be removed and used for further bioparticle collection in cleanroom environments.
Built-in high precision flow meter
The instrument will automatically detect the gas mass flow rate in the working condition
And adjust the fan pumping speed at any time to ensure that the set flow rate
When encountered due to air pressure or local air inlet channel blockage and other conditions
The instrument can automatically adjust the flow rate
In the 100L/Min sampling mode, BAS ensures ±2.5% flow rate accuracy
In 200L/Min sampling mode, BAS can ensure ±3% flow rate accuracy
BAS complies with ISO 14698 standards for biological cleanrooms and their associated controlled environments
Physical collection efficiency of 106.6% for 0.9μm particles at 100L/Min sampling mode
Better than the regulatory recommended comparison method
At 200L/Min sampling mode, the physical collection efficiency of 0.9μm particles can reach 97.4%
Specification
FLOW RATE： 100L/min
FLOW RATE ACCURACY： ±2.5%
ZONE： Over 20000 locations
SAMPLING VOLUMES： 1-6000L, 6 default volumes
DELAY： 0-59minutes59seconds
CYCLES： 1-99cycles
INTERVAL： 0-59minutes59seconds
SAMPLING HEAD： Φ0.60mm*280holes
DIMENSIONS： Φ110mm, H: 202mm (without foot mat)
WEIGHT： 2.7kg(6.0lbs)
EXTERNAL SURFACE： Anodized aluminium
POWER： 24V±10% AC adapter
BATTERY： 10.8V, 6800mAh rechargeable lithium battery, running for over 10 hours
DATA STORAGE： 20000 sets of sample records
DISPLAY： 4.3" capacitive touch screen
LANGUAGE： Chinese, English
CALIBRATION FREQUENCY： Recommend once a year
OPERATING CONDITIONS TEMPERATURE：5℃-30℃, relative humidity up to 80%
STORAGE CONDITIONS TEMPERATURE： 0℃-40℃, relative humidity up to 80%
SAFETY： EN 61010-1:2010, EN 61326-1:2013, EN 61326-2-2:2013,EN 61000-6-1:2007, EN 61000-6-3:2007+A1
WARRANTY： 2 years after activation